MAX6675 K-Type Thermocouple to Digital Converter Module (0 to 1024 °C)
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Circuits ElectronicsCheapest | K-Thermocouple- to-Digital Converter ( (MAX6675) | 215 EGP | View in store |
 Future Electronics | K-Thermocouple- to-Digital Converter (0C to +1024C) | 230 EGP | View in store |
 Most Electronics | Thermocouple with MAX6675 Module K-Type | 232 EGP273 | View in store |
 Ekostra | MAX6675 Module with K-Type Thermocouple Sensor up to 1024°C | 250 EGP | View in store |
 UGE | MAX6675 K Thermocouple Interface Module | 350 EGP385 | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 215 EGP
About this product
A breakout module based on the MAX6675 chip that converts the signal from a K-type thermocouple probe into a 12-bit digital reading over a three-wire SPI interface. It includes cold-junction compensation and thermocouple break detection. Used with Arduino and other microcontrollers to measure temperature in small industrial and household equipment.
Specifications
- Chip
- MAX6675
- Thermocouple type
- K-type
- Temperature range
- 0 to +1024 °C
- Resolution
- 12-bit
- Interface
- 3-wire SPI (read-only)
- Supply voltage
- 3.0 to 5.5 V
Frequently asked questions
What is the price of MAX6675 K-Type Thermocouple to Digital Converter Module (0 to 1024 °C) in Egypt?
MAX6675 K-Type Thermocouple to Digital Converter Module (0 to 1024 °C) currently costs between 215 and 350 EGP across 5 offers in Egypt.
Where can I buy MAX6675 K-Type Thermocouple to Digital Converter Module (0 to 1024 °C) in Egypt?
MAX6675 K-Type Thermocouple to Digital Converter Module (0 to 1024 °C) is available from Circuits Electronics, Future Electronics, Most Electronics, Ekostra, and UGE. Compare the offers above to find the best price.
How do I wire the MAX6675 module to an Arduino?
Connect VCC and GND for power, SCK to the SPI clock pin, CS to any free digital pin, and SO (DO) to the SPI MISO pin. Connect the two probe wires to the terminals marked + and −. Pin labels can vary by module, so check the silkscreen.
Can the module work with 3.3 V boards as well as 5 V boards?
The MAX6675 supply range is 3.0 to 5.5 V, so it can be powered from a 3.3 V or 5 V supply. Use a probe of K-type only, since the chip is designed for that thermocouple type.
