LD3007MS DC Brushless Cooling Fan 5 V 0.2 A 30×30×7 mm
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | LD3007MS DC Fan 5V 0.2A 30x30x7mm For Raspberry PI | 100 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 100 EGP
About this product
The LD3007MS is a compact 30 × 30 × 7 mm brushless DC cooling fan rated at 5 V and 0.2 A, with a 2-pin connector. It is designed for cooling Raspberry Pi boards and their enclosures. A fan of this size helps reduce heat during sustained processor load.
Specifications
- Rated voltage
- 5 V DC
- Rated current
- 0.2 A
- Dimensions
- 30 × 30 × 7 mm
- Fan type
- Brushless DC
- Connector
- 2-pin
Frequently asked questions
What is the price of LD3007MS DC Brushless Cooling Fan 5 V 0.2 A 30×30×7 mm in Egypt?
LD3007MS DC Brushless Cooling Fan 5 V 0.2 A 30×30×7 mm currently costs 100 EGP in Egypt.
Where can I buy LD3007MS DC Brushless Cooling Fan 5 V 0.2 A 30×30×7 mm in Egypt?
LD3007MS DC Brushless Cooling Fan 5 V 0.2 A 30×30×7 mm is available from Makers Electronics. Compare the offers above to find the best price.
How do I connect it to a Raspberry Pi?
Connect the positive lead (usually red) to a 5 V pin, such as pin 2 or pin 4 on the 40-pin header, and the negative lead (usually black) to a GND pin, such as pin 6. Do not power the fan from a GPIO signal pin.
Does it support speed control?
No. This is a 2-pin fan, so it runs at full speed whenever it is powered. Speed control would require an external driver circuit.
