KYORITSU 3007A Digital Insulation & Continuity Tester (2000MΩ)
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers ElectronicsCheapest | KYORITSU 3007A Digital Insulation / Continuity Tester (Made In THAILAND) | 19,000 EGP | View in store |
 UGE | Insulation Tester 2000MΩ Kyoritsu 3007A | 27,940 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 19,000 EGP
About this product
The Kyoritsu 3007A is a digital insulation and continuity tester with test voltages of 250 V, 500 V and 1000 V and an insulation range up to 2000 MΩ. It also measures continuity resistance up to 2000 Ω and AC voltage up to 600 V. It is used for insulation checks on cables, motors and wiring, and is made to IEC 61557 and IEC 61010-2-031.
Specifications
- Test Voltage
- 250V / 500V / 1000V
- Insulation Measuring Ranges
- 20MΩ / 200MΩ / 2000MΩ
- Continuity Measuring Ranges
- 20Ω / 200Ω / 2000Ω
- Continuity Measuring Current
- 200mA DC min.
- AC Voltage Range
- 0-600V AC
- Safety Standard
- IEC 61010-1 CAT.III 300V
Frequently asked questions
What is the price of KYORITSU 3007A Digital Insulation & Continuity Tester (2000MΩ) in Egypt?
KYORITSU 3007A Digital Insulation & Continuity Tester (2000MΩ) currently costs between 19,000 and 27,940 EGP across 2 offers in Egypt.
Where can I buy KYORITSU 3007A Digital Insulation & Continuity Tester (2000MΩ) in Egypt?
KYORITSU 3007A Digital Insulation & Continuity Tester (2000MΩ) is available from Makers Electronics and UGE. Compare the offers above to find the best price.
What is the difference between the insulation and continuity tests?
The insulation test applies a high DC test voltage (250 V to 1000 V) to measure leakage resistance between conductors. The continuity test uses a low voltage and current to measure small resistances, such as a cable or wire path.
Should the circuit be de-energized before an insulation test?
Yes. Always disconnect the power and isolate the circuit under test before an insulation measurement, and make sure the circuit is discharged before connecting the leads.
