IRF3205 N-Channel Power MOSFET 55V 110A TO-220
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers ElectronicsCheapest | IRF3205 N-Channel Power MOSFET Transistor 55V 110A 8mΩ TO-220 | 15 EGP | View in store |
 Microohm | IRF3205 high current N-Channel MOSFET Transistor | 20 EGP30 | View in store |
 Most Electronics | IRF3205 N-Channel MOSFET (55V, 110A) | 23.9 EGP29.47 | View in store |
 Future Electronics | IRF3205 MOSFET, 55 V | 25 EGP | View in store |
 RAM Electronics | IRF3205 N-Channel MOSFET | 25 EGP | View in store |
 Circuits Electronics | IRF3205 (55 V,110A) | 33 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 15 EGP
About this product
The IRF3205 is a high-current N-channel power MOSFET in a TO-220 package, rated for 55 V and up to 110 A continuous drain current at 10 V gate drive. Its very low on-resistance of about 8 mΩ makes it popular for motor drivers, power switching and high-current circuits in hobby projects.
Specifications
- Drain-source voltage (Vds)
- 55 V
- Continuous drain current (ID)
- 110 A at VGS = 10 V
- On-state resistance (Rds(on))
- 8 mΩ
- Gate-source voltage (VGS)
- ±20 V
- Gate threshold voltage (min)
- 2 V
- Rise time
- 101 ns
- Package
- TO-220
Frequently asked questions
What is the price of IRF3205 N-Channel Power MOSFET 55V 110A TO-220 in Egypt?
IRF3205 N-Channel Power MOSFET 55V 110A TO-220 currently costs between 15 and 33 EGP across 6 offers in Egypt.
Where can I buy IRF3205 N-Channel Power MOSFET 55V 110A TO-220 in Egypt?
IRF3205 N-Channel Power MOSFET 55V 110A TO-220 is available from Makers Electronics, Microohm, Most Electronics, Future Electronics, RAM Electronics, and Circuits Electronics. Compare the offers above to find the best price.
Can I control the IRF3205 directly from an Arduino?
Only with care. Its low 8 mΩ rating needs about 10 V on the gate. A 5 V Arduino pin turns it on only partly, so it will overheat under load. Use a logic-level MOSFET or a gate driver for 5 V control.
How do I wire it to switch a DC motor?
Connect the motor between the positive supply and the drain, the source to ground (shared with the controller), and the gate to the controller through a series resistor. Place a flyback diode across the motor terminals.
