IRF1407PBF N-Channel Power MOSFET 130A 75V 7.8mΩ TO-220AB
Prices updated: 14 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers ElectronicsCheapest | IRF1407PBF N-Channel Power MOSFET Transistor 130A-75V-7.8mΩ TO-220 | 40 EGP | View in store |
 RAM Electronics | IRF1407 N-Channel MOSFET | 50 EGP | View in store |
 Microohm | IRF1407 N-Channel Power MOSFET Transistor (130A-75V-7.8mΩ) TO-220 High Quality | 60 EGP70 | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 40 EGP
About this product
The IRF1407PBF is a 75 V N-channel HEXFET power MOSFET in a TO-220AB package, rated for 130 A continuous drain current and 7.8 mΩ maximum on-resistance. It is used for high-current switching in motor drivers, power supplies, inverters and battery-powered loads. Its maximum junction temperature is 175 °C.
Specifications
- Channel type
- N-channel
- Drain-source voltage (VDSS)
- 75 V
- Continuous drain current
- 130 A
- RDS(on) max
- 7.8 mΩ (at VGS = 10 V)
- Package
- TO-220AB
- Max junction temperature
- 175 °C
Frequently asked questions
What is the price of IRF1407PBF N-Channel Power MOSFET 130A 75V 7.8mΩ TO-220AB in Egypt?
IRF1407PBF N-Channel Power MOSFET 130A 75V 7.8mΩ TO-220AB currently costs between 40 and 60 EGP across 3 offers in Egypt.
Where can I buy IRF1407PBF N-Channel Power MOSFET 130A 75V 7.8mΩ TO-220AB in Egypt?
IRF1407PBF N-Channel Power MOSFET 130A 75V 7.8mΩ TO-220AB is available from Makers Electronics, RAM Electronics, and Microohm. Compare the offers above to find the best price.
Can I drive the IRF1407 directly from a 5 V Arduino pin?
Not reliably. The IRF1407 is a standard-threshold MOSFET that needs about 10 V on the gate to reach its rated on-resistance, so a 3.3 V or 5 V GPIO will not fully turn it on. Use a gate driver or a logic-level MOSFET for direct microcontroller control.
Does the IRF1407 need a heatsink?
At high currents, yes. The metal tab of the TO-220AB package is connected to the drain, so mount it on a heatsink with suitable insulation if the drain is at a different potential from the chassis. Use thermal compound for better heat transfer.
