HX711 24-Bit Weighing Scale ADC for Bridge Sensors
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 UGECheapest | HX711 IC ADC 24bit SOP16 Weight Sensor converter SMD | 37.05 EGP | View in store |
 Makers Electronics | HX711 – Weighing Scale Analog-to-Digital Converter 24-bit | 40 EGP | View in store |
 Most Electronics | HX711 Weighing Scale Analog-to-Digital Converter 24-bit | 50 EGP62.75 | View in store |
 Ekostra | HX711 Dual-Channel 24-Bit A/D Weight Pressure Sensor Module | 65 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 37.05 EGP
About this product
The HX711 is a 24-bit analog-to-digital converter IC designed to read bridge sensors such as load cells in weighing scales. It includes a low-noise programmable gain amplifier, two differential input channels and an on-chip regulator. It communicates with a microcontroller over a simple two-wire serial interface rather than I2C or SPI.
Specifications
- Resolution
- 24-bit
- Input channels
- Channel A (gain 128 or 64), Channel B (gain 32)
- Full-scale input (Channel A, gain 128)
- ±20mV with 5V AVDD
- Interface
- Two-wire serial (DOUT, PD_SCK)
- Supply voltage
- 2.6V to 5.5V
- Package
- SOP-16
Frequently asked questions
What is the price of HX711 24-Bit Weighing Scale ADC for Bridge Sensors in Egypt?
HX711 24-Bit Weighing Scale ADC for Bridge Sensors currently costs between 37.05 and 65 EGP across 4 offers in Egypt.
Where can I buy HX711 24-Bit Weighing Scale ADC for Bridge Sensors in Egypt?
HX711 24-Bit Weighing Scale ADC for Bridge Sensors is available from UGE, Makers Electronics, Most Electronics, and Ekostra. Compare the offers above to find the best price.
How do I connect a load cell to the HX711?
Connect the load cell's excitation wires to E+ and E-, and its signal wires to A+ and A-, following the color code in the cell's datasheet. Connect DOUT and PD_SCK to two microcontroller GPIO pins, and provide power and ground.
Can it be used with a 3.3V microcontroller?
The supply range of 2.6V to 5.5V includes 3.3V. The full-scale input range quoted for this chip assumes a 5V AVDD supply, so check your sensor's output level against it.
