HSS Spiral Flute Metric Screw Tap M4x0.7 Hex Shank
Currently unavailable
No store has this product in stock right now. Prices below are the last ones we recorded.
Prices updated: 14 Oct 2026
Price history
Lowest daily price, last 90 days
Not enough price history yet.
About this product
A high-speed steel spiral-flute metric screw tap with a 1/4 inch hex shank, sized M4×0.7 for cutting internal threads in pre-drilled holes. It suits manual and machine use, and its nitrided coating and spiral flutes help remove chips during tapping.
Specifications
- Material
- High speed steel (HSS)
- Thread size
- M4×0.7
- Shank
- 1/4 in hex
- Flute type
- Spiral flute
- Surface treatment
- Nitriding coated
- Use
- Hand and machine
Frequently asked questions
What drill size should I use before tapping M4x0.7?
The usual tap drill size for M4x0.7 threads is about 3.3 mm. Confirm against your thread specification or a tap drill chart before drilling.
How do I avoid breaking the tap?
Keep the tap square to the hole, use cutting oil, and back it off by about half a turn every turn or two to break the chips. Small taps break easily, so go slowly.
