GY-302 BH1750 Digital Light Intensity Sensor Module (I2C)
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 UGECheapest | GY-302 BH1750 Digital Light Intensity Sensor Module | 180 EGP | View in store |
 Microohm | GY-302 BH1750 Light Intensity Module | 250 EGP300 | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 180 EGP
About this product
The GY-302 is a breakout module built around the BH1750 digital ambient light sensor, which outputs light intensity in lux over I²C. It measures from 1 to 65535 lux with a spectral response similar to the human eye and includes 50/60 Hz industrial noise filtering. It is useful for automatic brightness control, lighting projects and environmental monitoring with microcontrollers.
Specifications
- Measurement range
- 1–65535 lux
- Interface
- I²C
- Supply voltage
- 3.6 V – 6 V
- Accuracy
- ±20%
- Noise filtering
- 50 Hz / 60 Hz
- Dimensions
- 18 x 14 mm
Frequently asked questions
What is the price of GY-302 BH1750 Digital Light Intensity Sensor Module (I2C) in Egypt?
GY-302 BH1750 Digital Light Intensity Sensor Module (I2C) currently costs between 180 and 250 EGP across 2 offers in Egypt.
Where can I buy GY-302 BH1750 Digital Light Intensity Sensor Module (I2C) in Egypt?
GY-302 BH1750 Digital Light Intensity Sensor Module (I2C) is available from UGE and Microohm. Compare the offers above to find the best price.
What I²C address does the GY-302 use?
The BH1750 default address is 0x23. When its ADDR pin is pulled high, the address changes to 0x5C, which lets you use two sensors on the same bus.
Can I power it from a 3.3 V board?
The listing specifies a supply of 3.6 V to 6 V, so check the module's regulator and voltage before powering it from a 3.3 V board such as ESP32. Connect VCC, GND, SDA and SCL to the microcontroller.
