ElectronicsEgypt
FOJAN FRC0603F2201TS 2.2kΩ ±1% 0603 SMD Chip Resistor 100mW

FOJAN FRC0603F2201TS 2.2kΩ ±1% 0603 SMD Chip Resistor 100mW

Part number: FRC0603F2201TSBrand: FOJANResistors & Potentiometers

Lowest price now

0.15 EGP

2 offers · 2 storesSave up to 40%

View in store: Makers Electronics

Prices updated: 13 Oct 2026

Compare prices

StorePriceView in store
Makers Electronics logoMakers ElectronicsCheapest0.15 EGPView in store
UGE logoUGE0.25 EGPView in store

Price history

Lowest daily price, last 90 days

0.150.150.1512 Oct 202613 Oct 2026

Lowest price recorded: 0.15 EGP

About this product

FOJAN FRC0603F2201TS is a 2.2 kΩ thick-film surface-mount chip resistor in the 0603 package. It is rated 100 mW with ±1% tolerance and ±100 ppm/°C temperature coefficient. It is used for pull-up and pull-down, voltage-divider and current-limiting duties on SMD circuit boards, and the listing states it is RoHS compliant.

Specifications

Resistance
2.2 kΩ (2200 Ω)
Tolerance
±1%
Power rating
100 mW
Package
0603 (SMD chip)
Temperature coefficient
±100 ppm/°C
Operating temperature range
-55 °C to +155 °C
Overload voltage (max)
75 V
Type
Thick film / فيلم سميك

Frequently asked questions

What is the price of FOJAN FRC0603F2201TS 2.2kΩ ±1% 0603 SMD Chip Resistor 100mW in Egypt?

FOJAN FRC0603F2201TS 2.2kΩ ±1% 0603 SMD Chip Resistor 100mW currently costs between 0.15 and 0.25 EGP across 2 offers in Egypt.

Where can I buy FOJAN FRC0603F2201TS 2.2kΩ ±1% 0603 SMD Chip Resistor 100mW in Egypt?

FOJAN FRC0603F2201TS 2.2kΩ ±1% 0603 SMD Chip Resistor 100mW is available from Makers Electronics and UGE. Compare the offers above to find the best price.

What are common uses for a 2.2kΩ SMD resistor?

It is commonly used as a pull-up or pull-down resistor on GPIO, reset or enable lines, in voltage dividers, and for LED current limiting. Check the circuit's voltage and current to confirm 2.2 kΩ and 100 mW are suitable.

Can I use this resistor on a breadboard?

No. The 0603 package is 1.6 x 0.8 mm and is meant for SMD pads on a PCB, so it needs SMD soldering tools or a suitable adapter. For breadboards, use a through-hole resistor of the same value.