ESP32 CAN Bus Expansion Board with SN65HVD230 Transceiver
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 UGE | PCB For ESP32 CAN Bus Expansion Board | 75 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 75 EGP
About this product
A PCB expansion board that adds a CAN bus interface to an ESP32 WiFi development board, using the SN65HVD230 CAN transceiver. It suits IoT and embedded projects that need reliable data exchange between nodes in noisy or electrically harsh environments, such as automotive and industrial networks.
Specifications
- CAN transceiver
- SN65HVD230
- Compatible board
- ESP32 WiFi development board
- Protocol
- CAN bus
- Transceiver supply voltage
- 3.3 V
Frequently asked questions
What is the price of ESP32 CAN Bus Expansion Board with SN65HVD230 Transceiver in Egypt?
ESP32 CAN Bus Expansion Board with SN65HVD230 Transceiver currently costs 75 EGP in Egypt.
Where can I buy ESP32 CAN Bus Expansion Board with SN65HVD230 Transceiver in Egypt?
ESP32 CAN Bus Expansion Board with SN65HVD230 Transceiver is available from UGE. Compare the offers above to find the best price.
Which ESP32 pins connect to the CAN transceiver?
The ESP32 uses its built-in TWAI (CAN) controller, and its TX and RX pins connect to the transceiver's TXD and RXD. The exact pins depend on the board, so check the silkscreen and your firmware configuration.
Does the CAN network need termination?
Yes. A CAN bus normally needs a 120 ohm termination resistor at each end of the bus. Without it, signal reflections can cause communication errors, especially at higher bit rates.
