EMI RFI Axial Ferrite Bead Inductor 120Ω 3A (3.5×9 mm)
Prices updated: 14 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 UGE | EMI RFI Filter Axial Ferrite Bead Inductor RH3.5*9*0.8 | 2.85 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 2.85 EGP
About this product
An axial ferrite bead on leaded wire, rated 120 Ω impedance at 100 MHz and 3 A DC current. It is slipped over a wire or component lead to suppress high-frequency noise and EMI/RFI on power or signal lines. Operating range is -25°C to +125°C.
Specifications
- Impedance @ 100 MHz
- 120Ω
- Impedance @ 25 MHz
- 80Ω
- DC Current Rating
- 3A
- Bead outer diameter
- 3.5 mm
- Bead inner diameter
- 0.8 mm
- Bead length
- 9 mm
- Mounting
- Through Hole
- Operating Temperature
- -25°C to +125°C
Frequently asked questions
What is the price of EMI RFI Axial Ferrite Bead Inductor 120Ω 3A (3.5×9 mm) in Egypt?
EMI RFI Axial Ferrite Bead Inductor 120Ω 3A (3.5×9 mm) currently costs 2.85 EGP in Egypt.
Where can I buy EMI RFI Axial Ferrite Bead Inductor 120Ω 3A (3.5×9 mm) in Egypt?
EMI RFI Axial Ferrite Bead Inductor 120Ω 3A (3.5×9 mm) is available from UGE. Compare the offers above to find the best price.
How do I use an EMI ferrite bead?
Pass the wire or component lead through the bead's 0.8 mm bore and place the bead close to the noise source or the input of the circuit. Wires thicker than the bore will not fit.
Can it be used on a power line?
Yes, on a DC line as long as the current stays below the 3 A rating. Ferrite beads add impedance at high frequencies, so they filter noise; they do not smooth DC supply voltage, which needs capacitors.
