DS18B20 Waterproof Digital Temperature Sensor Probe with 1m Cable
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers ElectronicsCheapest | DS18B20 Waterproof Temperature Sensor 3 Wire 100cm | 65 EGP | View in store |
 Microohm | DS18b20 Waterproof Digital Temperature Sensor 1 meter wire | 75 EGP90 | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 65 EGP
About this product
Waterproof DS18B20 digital temperature sensor with a stainless-steel probe and a 1-meter cable. It uses the 1-Wire interface, so several sensors can share a single data pin. Suitable for water tanks, aquariums, soil and outdoor temperature monitoring.
Specifications
- Interface
- 1-Wire digital
- Cable length
- 1 m
- Probe material
- Stainless steel
- Waterproof
- Yes
- Temperature range
- -55 °C to +125 °C
- Supply voltage
- 3.0 V to 5.5 V
Frequently asked questions
What is the price of DS18B20 Waterproof Digital Temperature Sensor Probe with 1m Cable in Egypt?
DS18B20 Waterproof Digital Temperature Sensor Probe with 1m Cable currently costs between 65 and 75 EGP across 2 offers in Egypt.
Where can I buy DS18B20 Waterproof Digital Temperature Sensor Probe with 1m Cable in Egypt?
DS18B20 Waterproof Digital Temperature Sensor Probe with 1m Cable is available from Makers Electronics and Microohm. Compare the offers above to find the best price.
How do I wire the DS18B20 probe to an Arduino?
Connect the red wire to 5V, the black wire to GND and the yellow data wire to a digital pin. Place a 4.7 kΩ pull-up resistor between the data line and VCC, as the 1-Wire bus requires it.
Can I use the DS18B20 with 3.3V boards such as ESP32?
Yes. The DS18B20 operates from 3.0 V to 5.5 V, so it works with 3.3 V logic boards. Keep the 4.7 kΩ pull-up resistor on the data line and share the ground between the sensor and the board.
