Double-Sided FR4 Copper Clad PCB Board, 150 x 200 mm
Currently unavailable
No store has this product in stock right now. Prices below are the last ones we recorded.
Prices updated: 14 Oct 2026
Price history
Lowest daily price, last 90 days
Not enough price history yet.
About this product
A double-sided copper-clad FR4 laminate board measuring 150 x 200 mm, used to make custom printed circuit boards. The FR4 substrate is rated up to 140 °C, and copper on both faces lets you route traces on either side. It suits home etching, cutting to size and prototyping projects.
Specifications
- Material
- FR4 copper-clad laminate
- Layers
- Double-sided
- Panel size
- 150 × 200 mm
- Thickness
- 2.1 mm ±0.15 mm
- Maximum operating temperature
- 140 °C
- Weight
- ~100 g
Frequently asked questions
How should I prepare the copper before etching?
Clean the copper with fine steel wool or a scouring pad, such as Scotch-Brite, then rinse and dry it thoroughly. Avoid touching the cleaned surface with bare fingers, since fingerprints can interfere with etching and toner transfer.
How do I cut the board to size?
Score the board with a utility knife along a straight edge and snap it, or cut it with a fine-tooth saw. Wear eye protection and a dust mask, because FR4 dust is an irritant.
