Crystal 6.000MHz HC-49S 20ppm 20pF 40Ω
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | Crystal 6.000MHz 49S 20PPM 20pF 40Ω | 3 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 3 EGP
About this product
A 6.000 MHz quartz crystal in a two-pin HC-49S through-hole package, rated at ±20 ppm frequency tolerance, 20 pF load capacitance and 40 Ω equivalent series resistance. It provides an external timing reference for microcontrollers and other circuits that require a crystal oscillator. Suitable for boards using the standard HC-49S footprint.
Specifications
- Frequency
- 6.000 MHz
- Frequency tolerance
- ±20 ppm
- Load capacitance
- 20 pF
- Equivalent series resistance (ESR)
- 40 Ω
- Package
- HC-49S
- Mounting
- Through-hole
- Pin count
- 2
Frequently asked questions
What is the price of Crystal 6.000MHz HC-49S 20ppm 20pF 40Ω in Egypt?
Crystal 6.000MHz HC-49S 20ppm 20pF 40Ω currently costs 3 EGP in Egypt.
Where can I buy Crystal 6.000MHz HC-49S 20ppm 20pF 40Ω in Egypt?
Crystal 6.000MHz HC-49S 20ppm 20pF 40Ω is available from Makers Electronics. Compare the offers above to find the best price.
How do I wire a crystal to a microcontroller?
Connect the two crystal pins to the oscillator pins of the MCU (commonly XTAL1 and XTAL2 or OSC1 and OSC2). Add a load capacitor from each pin to ground, sized according to the MCU datasheet and the crystal's 20 pF load rating.
Is a 6 MHz crystal suitable for my board?
Only if your MCU and firmware are set up for a 6 MHz clock. Many common boards run at 16 MHz, so check the clock configuration and the supported crystal range in your MCU datasheet.
