ElectronicsEgypt
Chip Resistor SMD 3MΩ ±1% 0.125W 0805 - FOJAN FRC0805F3004TS

Chip Resistor SMD 3MΩ ±1% 0.125W 0805 - FOJAN FRC0805F3004TS

Part number: FRC0805F3004TSBrand: FOJANResistors & Potentiometers

Lowest price now

0.2 EGP

1 offer · 1 stores

View in store: Makers Electronics

Prices updated: 14 Oct 2026

Compare prices

StorePriceView in store
Makers Electronics logoMakers Electronics0.2 EGPView in store

Price history

Lowest daily price, last 90 days

0.20.20.212 Oct 202614 Oct 2026

Lowest price recorded: 0.2 EGP

About this product

Chip Resistor SMD 3MΩ, a thick film 0805 surface-mount resistor from FOJAN with ±1% tolerance and 0.125W (125mW) power rating. Suited to high-impedance biasing, RC timing circuits and sensor input networks where very large resistance values are needed on compact PCBs.

Specifications

Resistance
3MΩ
Tolerance
±1%
Power rating
125mW
Temperature Coefficient
±100ppm/℃
Package
0805
Overload Voltage (Max)
150V
Operating Temperature Range
-55℃~+155℃
Type
Thick Film

Frequently asked questions

What is the price of Chip Resistor SMD 3MΩ ±1% 0.125W 0805 - FOJAN FRC0805F3004TS in Egypt?

Chip Resistor SMD 3MΩ ±1% 0.125W 0805 - FOJAN FRC0805F3004TS currently costs 0.2 EGP in Egypt.

Where can I buy Chip Resistor SMD 3MΩ ±1% 0.125W 0805 - FOJAN FRC0805F3004TS in Egypt?

Chip Resistor SMD 3MΩ ±1% 0.125W 0805 - FOJAN FRC0805F3004TS is available from Makers Electronics. Compare the offers above to find the best price.

Which footprint does this resistor need?

It is a 0805 surface-mount chip (body about 2.0 × 1.25 mm). It needs a standard 0805 PCB pad layout and is soldered to the surface of the board with a soldering iron or hot-air station, not through holes.

Is this value suitable as a pull-up or pull-down resistor?

Usually not. Pull-up and pull-down resistors for microcontroller pins are typically in the kΩ range. This megaohm value is intended for high-impedance uses such as bias networks, RC timing and input leakage paths. Keep the voltage across it within the 150V overload limit.