ElectronicsEgypt
3296W 2kΩ Trimpot Trimmer Potentiometer (202) 0.5W

3296W 2kΩ Trimpot Trimmer Potentiometer (202) 0.5W

Part number: 3296W-1-202Brand: BournsResistors & Potentiometers

Lowest price now

7 EGP

2 offers · 2 stores

View in store: Microohm

Prices updated: 13 Oct 2026

Compare prices

StorePriceView in store
Microohm logoMicroohmCheapest7 EGP10View in store
Makers Electronics logoMakers Electronics7 EGPView in store

Price history

Lowest daily price, last 90 days

7.1176.912 Oct 202613 Oct 2026

Lowest price recorded: 7 EGP

About this product

Bourns 3296W 2kΩ top-adjust trimmer potentiometer marked 202, rated 0.5 W, with a ±100 ppm/°C temperature coefficient and a -55 °C to +125 °C operating range. Used to fine-tune resistance for calibration, offset and bias settings in analog and sensor circuits. Adjusted with a screwdriver and mounted through-hole on a PCB.

Specifications

Resistance
2 kΩ
Tolerance
10 %
Temperature coefficient
±100 ppm/ºC
Operating temperature range
-55ºC to +125ºC
Power rating
0.5 W
Mounting
Through-hole

Frequently asked questions

What is the price of 3296W 2kΩ Trimpot Trimmer Potentiometer (202) 0.5W in Egypt?

3296W 2kΩ Trimpot Trimmer Potentiometer (202) 0.5W currently costs 7 EGP in Egypt.

Where can I buy 3296W 2kΩ Trimpot Trimmer Potentiometer (202) 0.5W in Egypt?

3296W 2kΩ Trimpot Trimmer Potentiometer (202) 0.5W is available from Microohm and Makers Electronics. Compare the offers above to find the best price.

How do I wire a trimmer potentiometer as a voltage divider?

Connect the two outer pins across the voltage range, for example GND and VCC or a reference voltage. Take the output from the middle pin (wiper). Turning the screw changes the voltage on the middle pin between the two ends.

What does the ±100 ppm/°C temperature coefficient mean for my design?

It means the resistance can drift by about ±100 parts per million per degree Celsius, so over a 10 °C change the value shifts by roughly ±0.1%. This matters for precision references and calibrated sensor circuits where stable settings are needed.