BMS 1S 3.7V Protection Board for Polymer 18650 with Nickel Strip
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Microohm | BMS 1S 3A 3.7V 2MOS Lithium Battery Protection Board for Polymer 18650 with Nickel Strip | 25 EGP35 | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 25 EGP
About this product
A 1S single-cell lithium battery protection board for polymer 18650 cells, supplied with a nickel strip for spot welding. It protects the cell against overcharge, over-discharge and overcurrent. Listed limits are a 4.25V overcharge cut-off, a 2.54V over-discharge cut-off and a 2A maximum continuous charging current.
Specifications
- Cell configuration
- 1S (single cell)
- Nominal cell voltage
- 3.7 V
- Compatible cell type
- Polymer 18650
- Overcharge voltage
- 4.25 ± 0.05 V
- Overcharge release voltage
- 4.23 ± 0.05 V
- Over-discharge voltage
- 2.54 ± 0.1 V
- Max continuous charging current
- 2 A
- Nickel strip
- Included
Frequently asked questions
What is the price of BMS 1S 3.7V Protection Board for Polymer 18650 with Nickel Strip in Egypt?
BMS 1S 3.7V Protection Board for Polymer 18650 with Nickel Strip currently costs 25 EGP in Egypt.
Where can I buy BMS 1S 3.7V Protection Board for Polymer 18650 with Nickel Strip in Egypt?
BMS 1S 3.7V Protection Board for Polymer 18650 with Nickel Strip is available from Microohm. Compare the offers above to find the best price.
Can I use this board with more than one cell?
No. It is a 1S board for a single 3.7V lithium cell. Series packs need a board rated for the matching number of cells (2S, 3S and so on).
How do I connect the cell and the load or charger?
Connect the cell through its nickel strip to B+ and B-, and the load or charger to P+ and P-. Keep the charging current at or below the listed 2A. Avoid soldering directly onto the cell because heat can damage it.
