ElectronicsEgypt
BC517 Darlington Transistor (30V, 1A, TO-92)

BC517 Darlington Transistor (30V, 1A, TO-92)

Part number: BC517Transistors & MOSFETs

Lowest price now

1.5 EGP

4 offers · 4 storesSave up to 33%

View in store: Circuits Electronics

Prices updated: 13 Oct 2026

Compare prices

StorePriceView in store
Circuits Electronics logoCircuits ElectronicsCheapest1.5 EGPView in store
Makers Electronics logoMakers Electronics2 EGPView in store
Future Electronics logoFuture Electronics2 EGPView in store
Most Electronics logoMost Electronics2.25 EGP2.68View in store

Price history

Lowest daily price, last 90 days

2.081.751.4312 Oct 202613 Oct 2026

Lowest price recorded: 1.5 EGP

About this product

BC517 Darlington transistor rated at 30V and 1A in a TO-92 package. The Darlington pair gives very high current gain, so a small base current can switch or drive heavier loads such as relay coils, LED arrays and small motors. Check the datasheet for pin order and polarity before wiring, since the TO-92 pinout varies between manufacturers.

Specifications

Type
Darlington pair
Voltage rating
30V
Current rating
1A
Package
TO-92

Frequently asked questions

What is the price of BC517 Darlington Transistor (30V, 1A, TO-92) in Egypt?

BC517 Darlington Transistor (30V, 1A, TO-92) currently costs between 1.5 and 2.25 EGP across 4 offers in Egypt.

Where can I buy BC517 Darlington Transistor (30V, 1A, TO-92) in Egypt?

BC517 Darlington Transistor (30V, 1A, TO-92) is available from Circuits Electronics, Makers Electronics, Future Electronics, and Most Electronics. Compare the offers above to find the best price.

Can I drive a relay directly with this transistor?

Yes, if the relay coil voltage stays within 30V and its current stays within the 1A rating. For inductive loads such as relay coils, add a flyback diode across the coil to protect the transistor from voltage spikes.

Which pin is base, collector and emitter?

The pin order for TO-92 packages differs between manufacturers, so do not assume it. Confirm the base, collector and emitter pins from the datasheet of the specific part you received before wiring the circuit.