Atmel AT24C02 2Kbit I2C EEPROM 1MHz DIP-8
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | AT24C02 EEPROM IC 2Kbits 1MHz I2C DIP-8 | 10 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 10 EGP
About this product
The AT24C02 is a 2-Kbit (256 x 8) serial EEPROM with an I2C-compatible two-wire interface, rated up to 1 MHz. It stores configuration data or calibration values that must survive power-off. It offers an 8-byte page write buffer, a write-protect pin and comes in an 8-pin DIP package for breadboard use.
Specifications
- Capacity
- 2 Kbit (256 x 8)
- Interface
- I2C (two-wire)
- Max clock
- 1 MHz
- Write cycle time
- 5 ms max
- Read current
- 1 mA max
- Standby current
- 0.8 µA max
- Package
- DIP-8
Frequently asked questions
What is the price of Atmel AT24C02 2Kbit I2C EEPROM 1MHz DIP-8 in Egypt?
Atmel AT24C02 2Kbit I2C EEPROM 1MHz DIP-8 currently costs 10 EGP in Egypt.
Where can I buy Atmel AT24C02 2Kbit I2C EEPROM 1MHz DIP-8 in Egypt?
Atmel AT24C02 2Kbit I2C EEPROM 1MHz DIP-8 is available from Makers Electronics. Compare the offers above to find the best price.
What I2C address does it use?
The base address is 0x50. The A0, A1 and A2 pins set the lower address bits, allowing up to eight devices on the same bus.
Do I need pull-up resistors?
Yes. SDA and SCL need pull-up resistors to the supply voltage, commonly around 4.7 kΩ on a 3.3V or 5V bus.
