ATmega8A-PU 8-bit AVR Microcontroller PDIP-28
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 MicroohmCheapest | ATmega8A U PDIP-28 Microcontroller | 175 EGP225 | View in store |
 RAM Electronics | ATMEGA8A-PU | 185 EGP | View in store |
 Makers Electronics | ATMEGA8A-PU 8-bit AVR Microcontroller DIP-28 (Original) | 195 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 175 EGP
About this product
An 8-bit AVR microcontroller in a 28-pin PDIP package with 8 KB flash, 1 KB SRAM and 512 bytes of EEPROM. It runs up to 16 MIPS at 16 MHz and is widely used in DIY and embedded projects that need serial communication, timers and general-purpose I/O.
Specifications
- Core
- 8-bit AVR, advanced RISC architecture
- Throughput
- Up to 16 MIPS at 16 MHz
- Flash memory
- 8 KB
- SRAM
- 1 KB
- EEPROM
- 512 bytes
- Package
- PDIP-28
- Flash write/erase cycles
- 10,000
- EEPROM write/erase cycles
- 100,000
Frequently asked questions
What is the price of ATmega8A-PU 8-bit AVR Microcontroller PDIP-28 in Egypt?
ATmega8A-PU 8-bit AVR Microcontroller PDIP-28 currently costs between 175 and 195 EGP across 3 offers in Egypt.
Where can I buy ATmega8A-PU 8-bit AVR Microcontroller PDIP-28 in Egypt?
ATmega8A-PU 8-bit AVR Microcontroller PDIP-28 is available from Microohm, RAM Electronics, and Makers Electronics. Compare the offers above to find the best price.
How is the ATmega8A programmed, and what clock do I need for 16 MHz?
It is programmed through an AVR programmer using ISP or a bootloader. The chip starts on its internal oscillator, so running at 16 MHz requires an external 16 MHz crystal or resonator.
What supply voltage should I use?
A 5 V supply is typical. Running at 16 MHz requires a supply in the 4.5 V to 5.5 V range according to the datasheet.
