AT45DB081E 8Mbit SPI DataFlash Memory, SOIC-8, 3.3V
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 UGE | AT45DB081E Data Nor SPI Flash Memory 8Mbit SOIC-8 pin 3.3V | 108 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 108 EGP
About this product
An 8-Mbit serial SPI flash memory from the AT45DB DataFlash family, supplied in an SOIC-8 package. It supports configurable 512/528-byte pages, two SRAM data buffers and fast continuous reads, and is used for data logging, firmware storage and configuration data in embedded projects.
Specifications
- Density
- 8 Mbit
- Interface
- SPI (modes 0 and 3)
- Supply voltage
- 2.3 - 3.6 V
- Maximum clock (continuous read)
- 85 MHz
- Package
- SOIC-8
- Page size
- 512 or 528 bytes (528 default)
Frequently asked questions
What is the price of AT45DB081E 8Mbit SPI DataFlash Memory, SOIC-8, 3.3V in Egypt?
AT45DB081E 8Mbit SPI DataFlash Memory, SOIC-8, 3.3V currently costs 108 EGP in Egypt.
Where can I buy AT45DB081E 8Mbit SPI DataFlash Memory, SOIC-8, 3.3V in Egypt?
AT45DB081E 8Mbit SPI DataFlash Memory, SOIC-8, 3.3V is available from UGE. Compare the offers above to find the best price.
Can I connect it directly to a 5V microcontroller?
No. The supply range is 2.3 to 3.6 V, so power it from a 3.3 V rail. Use a level shifter or a voltage divider on the SPI lines when the controller runs at 5 V, so the inputs are not overdriven.
Which SPI wiring is required?
Connect SCK, MOSI (SI), MISO (SO), chip select (CS) and power and ground. Keep CS high when idle, and use SPI mode 0 or 3 as the datasheet specifies. Add a decoupling capacitor close to the VCC pin.
