ElectronicsEgypt
AMS1117-1.2V SOT-223 1.2V 800mA Fixed Voltage Regulator

AMS1117-1.2V SOT-223 1.2V 800mA Fixed Voltage Regulator

Part number: AMS1117-1.2VBrand: AMSIntegrated Circuits (ICs)

Lowest price now

2 EGP

2 offers · 2 storesSave up to 60%

View in store: Makers Electronics

Prices updated: 14 Oct 2026

Compare prices

StorePriceView in store
Makers Electronics logoMakers ElectronicsCheapest2 EGPView in store
Most Electronics logoMost Electronics5 EGP7View in store

Price history

Lowest daily price, last 90 days

2.0321.9712 Oct 202614 Oct 2026

Lowest price recorded: 2 EGP

About this product

The AMS1117-1.2V is a low-dropout linear voltage regulator that provides a fixed 1.2 V output up to 800 mA from an input of up to 12 V. It is suited to powering 1.2 V circuits from a higher supply rail. It includes on-chip thermal limiting for protection and comes in a compact SOT-223 surface-mount package.

Specifications

Output Voltage
1.2 V (fixed)
Maximum Input Voltage
12 V
Maximum Output Current
800 mA
Package
SOT-223 (surface mount)
Operating Junction Temperature
-40 to 125 °C
Maximum Power Dissipation
600 mW
Thermal Resistance
150 °C/W

Frequently asked questions

What is the price of AMS1117-1.2V SOT-223 1.2V 800mA Fixed Voltage Regulator in Egypt?

AMS1117-1.2V SOT-223 1.2V 800mA Fixed Voltage Regulator currently costs between 2 and 5 EGP across 2 offers in Egypt.

Where can I buy AMS1117-1.2V SOT-223 1.2V 800mA Fixed Voltage Regulator in Egypt?

AMS1117-1.2V SOT-223 1.2V 800mA Fixed Voltage Regulator is available from Makers Electronics and Most Electronics. Compare the offers above to find the best price.

What input voltage can I connect to the AMS1117-1.2V?

Keep the input below 12 V and above 1.2 V by at least the dropout voltage. The heat generated is roughly (Vin − Vout) × Iout, so a large input-to-output difference at high current requires a heatsink or copper area to stay within the 600 mW maximum.

Does the AMS1117-1.2V need external capacitors?

Yes. Use the input and output capacitor values recommended in the datasheet and place them close to the regulator pins.