AHT10 High Precision Digital Temperature and Humidity Sensor Module
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 UGECheapest | AHT10 High Precision Digital Temperature and Humidity Sensor Module | 175 EGP | View in store |
 Microohm | AHT10 High Precision Digital Temperature and Humidity Sensor Module | 180 EGP250 | View in store |
| Ekostra | AHT10 High Precision Digital Temperature and Humidity Sensor Module | 180 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 175 EGP
About this product
The AHT10 is a digital temperature and humidity sensor with a factory-calibrated I²C output, so no compensation code is needed. It measures -40 to +85 °C and 0 to 100% RH, with typical accuracy of ±0.3 °C and ±2% RH. It is designed for battery-operated, low-power weather stations, HVAC monitoring and indoor climate projects.
Specifications
- Temperature range
- -40 °C to +85 °C
- Temperature accuracy
- ±0.3 °C (typical)
- Temperature resolution
- 0.01 °C
- Humidity range
- 0% to 100% RH
- Humidity accuracy
- ±2% RH (typical)
- Supply voltage
- 1.8 V to 3.6 V (typical)
- Interface / address
- I²C, fixed address 0x38
Frequently asked questions
What is the price of AHT10 High Precision Digital Temperature and Humidity Sensor Module in Egypt?
AHT10 High Precision Digital Temperature and Humidity Sensor Module currently costs between 175 and 180 EGP across 3 offers in Egypt.
Where can I buy AHT10 High Precision Digital Temperature and Humidity Sensor Module in Egypt?
AHT10 High Precision Digital Temperature and Humidity Sensor Module is available from UGE, Microohm, and Ekostra. Compare the offers above to find the best price.
Do I need to calibrate the AHT10 in my code?
No. The AHT10 outputs a factory-calibrated digital signal, so you read the temperature and humidity values directly over I²C without applying temperature compensation in your code.
Can I connect two AHT10 sensors on the same I²C bus?
Not directly, because the I²C address is fixed at 0x38 and both sensors would respond to the same address. Use one sensor per bus or a multiplexer. Also check the module's supply voltage, since the chip is rated for 1.8 V to 3.6 V.
