ElectronicsEgypt
ADS1115 16-Bit I2C ADC Module, 4-Channel with PGA

ADS1115 16-Bit I2C ADC Module, 4-Channel with PGA

Part number: ADS1115Brand: Texas InstrumentsIntegrated Circuits (ICs)

Lowest price now

250 EGP

3 offers · 3 storesSave up to 9%

View in store: Microohm

Prices updated: 13 Oct 2026

Compare prices

StorePriceView in store
Microohm logoMicroohmCheapest250 EGP350View in store
Ekostra logoEkostra275 EGPView in store
Makers Electronics logoMakers Electronics275 EGPView in store

Price history

Lowest daily price, last 90 days

25425024612 Oct 202613 Oct 2026

Lowest price recorded: 250 EGP

About this product

The ADS1115 is a 16-bit analog-to-digital converter with an I2C interface, four single-ended inputs (or two differential) and a programmable-gain amplifier. It is used for precise voltage measurement, sensor interfacing and battery monitoring with microcontrollers such as Arduino, ESP32 and Raspberry Pi.

Specifications

Resolution
16-bit
Interface
I2C
Channels
4 single-ended or 2 differential
Supply voltage
2.0 V to 5.5 V
Data rate
8 to 860 SPS
Input ranges
±0.256 V to ±6.144 V (programmable)
I2C addresses
0x48 to 0x4B
Continuous mode current
150 µA

Frequently asked questions

What is the price of ADS1115 16-Bit I2C ADC Module, 4-Channel with PGA in Egypt?

ADS1115 16-Bit I2C ADC Module, 4-Channel with PGA currently costs between 250 and 275 EGP across 3 offers in Egypt.

Where can I buy ADS1115 16-Bit I2C ADC Module, 4-Channel with PGA in Egypt?

ADS1115 16-Bit I2C ADC Module, 4-Channel with PGA is available from Microohm, Ekostra, and Makers Electronics. Compare the offers above to find the best price.

How do I set the I2C address of the ADS1115?

Connect the ADDR pin to GND for 0x48, VDD for 0x49, SDA for 0x4A or SCL for 0x4B. Use the same address in your code when you initialize the device.

Can I use the ADS1115 with a 3.3 V board like ESP32?

Yes. Power the module from 3.3 V and keep every input between 0 V and VDD, because channel inputs must not exceed the supply rail. Check whether the module already has pull-up resistors on SDA and SCL before adding external ones.