ADC0808CCN 8-Bit 8-Channel Analog-to-Digital Converter, PDIP-28
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 EkostraCheapest | ADC0808CCN Analog to Digital Converter (ADC) IC PDIP-28 | 120 EGP150 | View in store |
 Most Electronics | ADC0808 8 bit A/D Convertor with 8-Channel Multiplexer | 144 EGP170 | View in store |
 Makers Electronics | ADC0808 8 Bit A/D Converter With 8-Channel Multiplexer DIP-28 | 145 EGP | View in store |
 Circuits Electronics | ADC0808 8 bit A/D Convertor with 8-Channel Multiplexer | 175 EGP | View in store |
 Microohm | ADC0808CCN PDIP-28 Analog to Digital Converter-ADC | 185 EGP220 | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 120 EGP
About this product
An 8-bit successive-approximation analog-to-digital converter with an 8-channel input multiplexer, supplied in a 28-pin DIP package. It is used to read analog sensors such as potentiometers and temperature or light sensors into a microcontroller through a parallel 8-bit output.
Specifications
- Resolution
- 8 bits
- Analog inputs
- 8 channels
- Conversion time
- 100 µs
- Total unadjusted error
- ±½ LSB and ±1 LSB
- Power consumption
- 15 mW
- Reference voltage
- 5 V DC or adjusted span voltage
- Package
- PDIP-28
Frequently asked questions
What is the price of ADC0808CCN 8-Bit 8-Channel Analog-to-Digital Converter, PDIP-28 in Egypt?
ADC0808CCN 8-Bit 8-Channel Analog-to-Digital Converter, PDIP-28 currently costs between 120 and 185 EGP across 5 offers in Egypt.
Where can I buy ADC0808CCN 8-Bit 8-Channel Analog-to-Digital Converter, PDIP-28 in Egypt?
ADC0808CCN 8-Bit 8-Channel Analog-to-Digital Converter, PDIP-28 is available from Ekostra, Most Electronics, Makers Electronics, Circuits Electronics, and Microohm. Compare the offers above to find the best price.
How do I connect it to a microcontroller?
Select the channel with the ADDA, ADDB and ADDC address pins, pulse ALE to latch the address, then pulse START to begin conversion. Read the 8-bit output when EOC goes high. A clock of about 640 kHz gives the 100 µs conversion time listed in the datasheet.
What input voltage range is allowed?
Analog inputs must stay between GND and the reference voltage, typically 0 to 5 V with a 5 V reference. Voltages outside this range can give wrong readings or damage the device.
