7S 25A Li-ion BMS Board with Balancing and Temperature Protection
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | Lithium-ion Battery Charger Protection Module (BMS) 7S 25A 60V with Cell Balancing, Aluminum Heat Sink & Temperature Protection | 325 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 325 EGP
About this product
A 7-cell (7S) lithium-ion BMS board rated for 25A, built on 10-MOS circuitry. It includes cell balancing, thermal protection and an aluminum heat sink, and comes with an 8-pin wiring cable for connecting the board to the pack.
Specifications
- Cells in series
- 7S
- Rated current
- 25A
- MOSFET configuration
- 10-MOS
- Cell balancing
- Yes
- Temperature protection
- Yes
- Heat sink
- Aluminum
- Wiring cable
- 8-pin
- Voltage rating (as listed)
- 60V
Frequently asked questions
What is the price of 7S 25A Li-ion BMS Board with Balancing and Temperature Protection in Egypt?
7S 25A Li-ion BMS Board with Balancing and Temperature Protection currently costs 325 EGP in Egypt.
Where can I buy 7S 25A Li-ion BMS Board with Balancing and Temperature Protection in Egypt?
7S 25A Li-ion BMS Board with Balancing and Temperature Protection is available from Makers Electronics. Compare the offers above to find the best price.
What pack voltage does a 7S Li-ion pack use?
Seven Li-ion cells in series give about 25.9V nominal (3.7V per cell), and about 29.4V when fully charged at 4.2V per cell. The 60V value in the listing is a rating, so check the board's datasheet for its exact limits.
What is the 8-pin cable used for?
The 8-pin cable carries the balance connections from the cells to the board. Connect it in order from the negative end, following the labels on the board, and check the wiring diagram before powering the pack.
