602030 Li-Polymer Battery 3.7V 300mAh with Pre-Soldered Wires
Prices updated: 14 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers ElectronicsCheapest | Rechargeable 602030 LIPO Battery Cell 3.7V 300mAh Wire Solder | 65 EGP | View in store |
 Ekostra | 602030 3.7V 300mAh LiPo Rechargeable Battery | 65 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 65 EGP
About this product
The 602030 is a rechargeable 3.7V Li-Polymer cell rated at 300mAh, supplied with pre-soldered wire leads. Its compact flat form suits portable electronics, wearable projects and DIY devices where space is limited. It must be used with a suitable charger and protection circuit.
Specifications
- Chemistry
- Li-Polymer
- Nominal voltage
- 3.7 V
- Capacity
- 300 mAh
- Size code (from part number)
- 6 x 20 x 30 mm
- Leads
- Pre-soldered wire
- Rechargeable
- Yes
Frequently asked questions
What is the price of 602030 Li-Polymer Battery 3.7V 300mAh with Pre-Soldered Wires in Egypt?
602030 Li-Polymer Battery 3.7V 300mAh with Pre-Soldered Wires currently costs 65 EGP in Egypt.
Where can I buy 602030 Li-Polymer Battery 3.7V 300mAh with Pre-Soldered Wires in Egypt?
602030 Li-Polymer Battery 3.7V 300mAh with Pre-Soldered Wires is available from Makers Electronics and Ekostra. Compare the offers above to find the best price.
How should I charge this Li-Polymer cell?
Use a single-cell Li-Po charger that stops at 4.2 V, such as a TP4056-based module with protection. Never charge it with a fixed-voltage supply or a charger that does not limit voltage.
What protection does the cell need?
Li-Polymer cells need protection against overcharge, over-discharge (below about 3 V) and short circuits. Do not short the wires, and use a protection board when the cell is not built into a protected pack.
