6-DOF Aluminum Robotic Arm Kit with MG996 and SR-1501MG Servos
Prices updated: 14 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | Aluminum Robotic Arm 6 DOF Kit with (4 PCS MG996 Servo + 2 PCS SR-1501MG Digital Servo) | 5,200 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 5,200 EGP
About this product
A 6-degree-of-freedom aluminum robotic arm kit with four MG996 servos and two SR-1501MG digital servos, plus a gear gripper and cup-bearing joints. It is designed for learning robotics, motion control and pick-and-place experiments. Each servo is driven by a PWM control signal from a microcontroller or servo driver board.
Specifications
- Degrees of freedom
- 6
- Frame material
- Aluminum
- Servos
- 4 × MG996 and 2 × SR-1501MG (digital)
- Gripper
- Gear gripper
- Joints
- Cup-bearing joints
Frequently asked questions
What is the price of 6-DOF Aluminum Robotic Arm Kit with MG996 and SR-1501MG Servos in Egypt?
6-DOF Aluminum Robotic Arm Kit with MG996 and SR-1501MG Servos currently costs 5,200 EGP in Egypt.
Where can I buy 6-DOF Aluminum Robotic Arm Kit with MG996 and SR-1501MG Servos in Egypt?
6-DOF Aluminum Robotic Arm Kit with MG996 and SR-1501MG Servos is available from Makers Electronics. Compare the offers above to find the best price.
How do I control the servos?
Each servo has signal, power and ground wires and is controlled by a PWM signal from an Arduino, an ESP32 or a PWM servo driver board such as the PCA9685. Connect the grounds of the servos and the controller together.
Can I power the servos from the Arduino 5V pin?
Not for all six at once. Servos draw large current peaks under load, so use a separate regulated supply that matches each servo's rated voltage and current. Check the rating before connecting.
