6-Channel 5V Relay Module with Optocoupler Isolation
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | Relay Module 6 Channel 5V | 165 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 165 EGP
About this product
A 6-channel relay module with a 5 V coil and optoelectronic isolation, controlled from microcontroller pins or development boards. Each relay switches up to 10 A, with contacts rated 250 VAC or 125 VDC, and six LEDs show which relay is active. The inputs are active-LOW.
Specifications
- Channels
- 6
- Supply voltage (VCC)
- 5 V
- Relay coil voltage
- 5 V
- Trigger logic
- Active LOW
- Maximum contact voltage
- 250 VAC / 125 VDC
- Maximum current
- 10 A
- Isolation
- Optoelectronic
- Board size
- 106 x 57 x 17 mm
Frequently asked questions
What is the price of 6-Channel 5V Relay Module with Optocoupler Isolation in Egypt?
6-Channel 5V Relay Module with Optocoupler Isolation currently costs 165 EGP in Egypt.
Where can I buy 6-Channel 5V Relay Module with Optocoupler Isolation in Egypt?
6-Channel 5V Relay Module with Optocoupler Isolation is available from Makers Electronics. Compare the offers above to find the best price.
How do I control the relays from an Arduino or ESP32?
Connect each IN pin to a free GPIO, and connect VCC and GND to a 5 V supply and common ground. Drive a pin LOW to energise that relay and HIGH to release it. ESP32 logic is 3.3 V, so confirm the module accepts 3.3 V input before connecting it.
Can it switch mains-powered loads?
The contacts are rated 250 VAC and 10 A, so mains loads can be switched within those limits. Mains wiring must be properly insulated, enclosed and fused, and should be done by a qualified person.
