5V DC Brushless Cooling Fan 80x80x25mm
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Ekostra | 5V DC Cooling Fan 8x8cm | 55 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 55 EGP
About this product
A 5V DC brushless cooling fan in an 80 x 80 x 25 mm frame with four unthreaded corner mounting holes, rated at about 2500 to 2800 RPM and 32 to 40 CFM. It is used to cool Raspberry Pi and Arduino or ESP32 enclosures, 3D printer electronics, power supplies and other low-voltage DIY builds.
Specifications
- Voltage
- 5V DC
- Type
- Brushless DC
- Dimensions
- 80 mm x 80 mm x 25 mm
- Speed
- 2500 RPM to 2800 RPM
- Airflow
- 32 CFM to 40 CFM
- Noise level
- ≤ 28 dBA
- Mounting
- 4 unthreaded corner holes
Frequently asked questions
What is the price of 5V DC Brushless Cooling Fan 80x80x25mm in Egypt?
5V DC Brushless Cooling Fan 80x80x25mm currently costs 55 EGP in Egypt.
Where can I buy 5V DC Brushless Cooling Fan 80x80x25mm in Egypt?
5V DC Brushless Cooling Fan 80x80x25mm is available from Ekostra. Compare the offers above to find the best price.
How do I wire this fan to a 5V supply?
Connect the red wire to 5V and the black wire to ground, and confirm the colors against the product before wiring. Share the ground with your controller so the signal references match.
Can I power the fan from an Arduino or ESP32 pin?
It is not recommended. A GPIO pin cannot supply the fan's current reliably, so power the fan from a separate 5V supply or regulator and connect only the grounds together with the controller.
