4-Pin Tactile Push Button Switch 6x6x10mm
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Most Electronics | Press Button 4Pin ( 6x6x10mm ) | 1.25 EGP1.45 | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 1.25 EGP
About this product
A 6x6x10mm tactile push button with four pins, designed for Arduino projects, prototyping and educational circuits. It is normally open: the pins are disconnected at rest and close the circuit momentarily while pressed. It mounts on a PCB or a solderless breadboard and gives clear tactile feedback.
Specifications
- Size
- 6 x 6 x 10 mm
- Number of pins
- 4
- Contact type
- Normally open (momentary)
- Contact technology
- Dome (tactile feedback)
- Mounting
- PCB or breadboard
Frequently asked questions
What is the price of 4-Pin Tactile Push Button Switch 6x6x10mm in Egypt?
4-Pin Tactile Push Button Switch 6x6x10mm currently costs 1.25 EGP in Egypt.
Where can I buy 4-Pin Tactile Push Button Switch 6x6x10mm in Egypt?
4-Pin Tactile Push Button Switch 6x6x10mm is available from Most Electronics. Compare the offers above to find the best price.
How do I wire this 4-pin switch?
The two pins on each side are internally connected. Use one pin from one side and the diagonally opposite pin, so the circuit closes when pressed. Avoid using two pins on the same side as the switch terminals, because they are always connected.
Can I use it with an Arduino?
Yes. A common method is to connect one pin to a digital input and the diagonal pin to GND, then enable the internal pull-up with INPUT_PULLUP in code. The input reads LOW when the button is pressed.
