3D Printer Heater Cartridge 12V 35.5W 6x20 mm
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 UGE | 3D Printer Heater Pipe 12V 35.5W | 50 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 50 EGP
About this product
A 12 V cartridge heater, 6 × 20 mm and rated at 35.5 W, for heating 3D printer hotends such as MK8-style extruders. It comes with 1 m lead wires for easy connection. It must be used with a thermistor or thermocouple and a temperature controller, because it can reach very high temperatures without regulation.
Specifications
- Voltage
- 12 V
- Power
- 35.5 W
- Current
- 2.95 A
- Size
- 6 × 20 mm
- Lead length
- 1 m
- Application
- 3D printer hotend
Frequently asked questions
What is the price of 3D Printer Heater Cartridge 12V 35.5W 6x20 mm in Egypt?
3D Printer Heater Cartridge 12V 35.5W 6x20 mm currently costs 50 EGP in Egypt.
Where can I buy 3D Printer Heater Cartridge 12V 35.5W 6x20 mm in Egypt?
3D Printer Heater Cartridge 12V 35.5W 6x20 mm is available from UGE. Compare the offers above to find the best price.
Do I need a thermistor and temperature control?
Yes. Without a thermistor or thermocouple and a controller that switches the heater off at the set temperature, the cartridge can overheat. Always verify your temperature readings before printing.
How should the heater be wired?
The heater is driven through the printer's heater output, which is switched by a MOSFET on the control board, rather than connected directly to a power supply. At 12 V it draws about 2.95 A.
