3362P 500Ω Trimpot Trimmer Potentiometer (501) 0.5W
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Microohm | 3362P 500 Ohm Trimpot Trimmer Potentiometer 501 0.5W | 6.5 EGP9.5 | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 6.5 EGP
About this product
Bourns 3362P 500Ω Trimpot trimmer potentiometer marked 501, rated 0.5 W. Used to fine-tune resistance in circuits, such as setting reference voltages, bias points or sensor calibration. It is adjusted with a small screwdriver on the top screw and is mounted through-hole on a PCB.
Specifications
- Resistance
- 500 Ω
- Tolerance
- ±10%
- Power rating
- 0.5 W
- Mounting
- Through-hole
- Adjustment
- Top-adjust, multi-turn
- Marking code
- 501
Frequently asked questions
What is the price of 3362P 500Ω Trimpot Trimmer Potentiometer (501) 0.5W in Egypt?
3362P 500Ω Trimpot Trimmer Potentiometer (501) 0.5W currently costs 6.5 EGP in Egypt.
Where can I buy 3362P 500Ω Trimpot Trimmer Potentiometer (501) 0.5W in Egypt?
3362P 500Ω Trimpot Trimmer Potentiometer (501) 0.5W is available from Microohm. Compare the offers above to find the best price.
How do I wire a trimmer potentiometer as a voltage divider?
Connect the two outer pins across the voltage range, for example GND and VCC or a reference voltage. Take the output from the middle pin (wiper). Turning the screw changes the voltage on the middle pin between the two ends.
Is the 0.5 W rating enough for my circuit?
The 0.5 W rating limits the power dissipated in the element. Calculate P = V²/R across the full element and keep it below 0.5 W. Trimmers are meant for low-current signal and setting circuits, not for carrying load current.