16x2 Character LCD Module, Blue Backlight (HD44780)
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
| Most ElectronicsCheapest | Character LCD 2×16 (blue blacklight) | 64.9 EGP76.12 | View in store |
 RAM Electronics | Character LCD 2x16 Blue 1602 | 65 EGP | View in store |
| Ekostra | LCD1602 Parallel LCD Display with Blue Backlight | 70 EGP | View in store |
 Microohm | LCD1602 Parallel LCD Display with Blue Backlight 1602A | 70 EGP100 | View in store |
| ElectroHub | LCD1602 16×2 Character LCD Display Module (Blue Backlight) | 75 EGP80 | View in store |
 Future Electronics | Character LCD Module 16 char.x2 lines | 75 EGP | View in store |
 UGE | LCD DISPLAY 16X2 BLUE | 75 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 64.9 EGP
About this product
16×2 character LCD module with a blue LED backlight and an HD44780-compatible controller. It shows two rows of 16 alphanumeric characters through a standard 16-pin parallel interface. It is widely used with Arduino and other microcontroller boards for menus, readings and status messages in embedded and measurement projects.
Specifications
- Display
- 16 characters × 2 lines
- Backlight
- Blue LED
- Controller
- HD44780-compatible
- Character matrix
- 5 × 8 dots
- Interface
- 16-pin parallel
- Operating voltage
- Typically 5V DC
- Contrast
- Adjustable
Frequently asked questions
What is the price of 16x2 Character LCD Module, Blue Backlight (HD44780) in Egypt?
16x2 Character LCD Module, Blue Backlight (HD44780) currently costs between 64.9 and 75 EGP across 7 offers in Egypt.
Where can I buy 16x2 Character LCD Module, Blue Backlight (HD44780) in Egypt?
16x2 Character LCD Module, Blue Backlight (HD44780) is available from Most Electronics, RAM Electronics, Ekostra, Microohm, ElectroHub, Future Electronics, and UGE. Compare the offers above to find the best price.
How do I wire this LCD to an Arduino?
Connect VSS to GND and VDD to 5V, and connect the contrast pin V0 to a potentiometer wiper. Then wire RS, RW (to GND for write-only use), E, and the data pins D4 to D7 for 4-bit mode. The backlight pins A and K need a current-limiting path as the module's datasheet specifies.
Can this module run on 3.3V boards like ESP32?
The listing states a typical operating voltage of 5V DC, so use a 5V supply as specified. For 3.3V logic boards, check the module's datasheet and logic-level requirements, and use level shifting where needed before connecting the data lines.
