10D270K Metal Oxide Varistor (MOV) 27V, 10mm Disc
Prices updated: 14 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 UGE | Metal Oxide Varistor MOV 10D270K | 6.84 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 6.84 EGP
About this product
The 10D270K is a metal oxide varistor, a voltage-dependent resistor that clamps voltage spikes when the applied voltage exceeds its rated level. It is used to protect low-voltage circuits and power inputs against surges and transients. It has leads for through-hole mounting, and the 10D code indicates a 10 mm disc body.
Specifications
- Model
- 10D270K
- Type
- Metal oxide varistor (MOV)
- Maximum limited voltage
- 27V
- Disc diameter (from 10D code)
- 10 mm
- Lead length
- 2.8 cm (1.1 in)
- Mounting
- Through-hole (leaded)
Frequently asked questions
What is the price of 10D270K Metal Oxide Varistor (MOV) 27V, 10mm Disc in Egypt?
10D270K Metal Oxide Varistor (MOV) 27V, 10mm Disc currently costs 6.84 EGP in Egypt.
Where can I buy 10D270K Metal Oxide Varistor (MOV) 27V, 10mm Disc in Egypt?
10D270K Metal Oxide Varistor (MOV) 27V, 10mm Disc is available from UGE. Compare the offers above to find the best price.
Can I use the 10D270K on 220V mains?
No. Its 27V rating is far below mains voltage, so it would conduct continuously on a 220V line. For mains protection, use a varistor with a much higher rating, such as one in the 10D271K range, and follow the datasheet for the correct voltage.
How is a varistor connected in a circuit?
A varistor is connected in parallel across the line or input it protects, so it sits between the positive and negative rails, or between live and neutral on AC lines. It clamps surges to a safe level and should be used together with a fuse for protection.
