10uF 25V Aluminium Electrolytic Capacitor, Radial Leads
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 MicroohmCheapest | Electrolytic Capacitor 10uF 25v | 0.75 EGP1 | View in store |
 Most Electronics | Electrolytic Capacitor (10UF , 25V) | 0.78 EGP0.91 | View in store |
 RAM Electronics | Capacitor 10uF 25V | 1 EGP | View in store |
 Makers Electronics | Electrolytic Capacitor Frolyt 10µF 25V | 2 EGP | View in store |
 Circuits Electronics | 10 uf Capacitor | 3 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 0.75 EGP
About this product
A 10 µF, 25 V radial aluminium electrolytic capacitor used for filtering and smoothing power rails, decoupling and energy storage in power and audio circuits. It is a polarized component, so the positive lead must connect to the higher potential. Its voltage rating should be equal to or higher than the maximum voltage in the circuit.
Specifications
- Capacitance
- 10 µF
- Voltage rating
- 25 V
- Type
- Aluminium electrolytic
- Polarity
- Polarized
- Mounting
- Radial leads
Frequently asked questions
What is the price of 10uF 25V Aluminium Electrolytic Capacitor, Radial Leads in Egypt?
10uF 25V Aluminium Electrolytic Capacitor, Radial Leads currently costs between 0.75 and 3 EGP across 5 offers in Egypt.
Where can I buy 10uF 25V Aluminium Electrolytic Capacitor, Radial Leads in Egypt?
10uF 25V Aluminium Electrolytic Capacitor, Radial Leads is available from Microohm, Most Electronics, RAM Electronics, Makers Electronics, and Circuits Electronics. Compare the offers above to find the best price.
How do I identify the positive lead of this capacitor?
The negative lead is usually marked with a stripe on the can, and the positive lead is typically the longer one. Always confirm the polarity before soldering, because reversing a polarized electrolytic capacitor can damage it.
Can I use this 25 V capacitor in a 12 V circuit?
Yes. A 25 V rating is above 12 V, which leaves margin for voltage spikes and ripple. Do not use it on circuits whose voltage approaches or exceeds 25 V.
